Tag Archives: RouterBoard

Mikrotik news

hEX

hEX is a five port gigabit ethernet router for locations where wireless connectivity is not required. The device has a full size USB port. This new updated revision of the hEX brings several improvements in performance.

It is affordable, small and easy to use, but at the same time comes with a very powerful dual core 880MHz CPU and 256MB RAM, capable of all the advanced configurations that RouterOS supports.

IPsec Hardware encryption (~470Mbps) and dude server package is supported, microSD slot on it also provides improved r/w speed for database storage on microSD card.

Product specifications

Details
Product code RB750Gr3
CPU nominal frequency 880 MHz
CPU core count 2
Size of RAM 256 MB
10/100/1000 Ethernet ports 5
Number of USB ports 1
Power Jack 1
Supported input voltage 8 V – 30 V
PoE in Yes
Voltage Monitor Yes
PCB temperature monitor Yes
Dimensions 113x89x28mm
Operating System RouterOS
Tested ambient temperature -30 + 70 C
CPU MT7621A
Max Power consumption 5W
USB slot type USB type A
USB Power Reset Yes
Storage type FLASH
Storage size 16 MB
CPU Threads count 4
Suggested price $59.95

Ethernet test results

RB750Gr3 MT7621A (880Mhz) 1G all port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 162.4 1,972.2 443.7 1,817.4 1039.1 532.0
Bridging 25 bridge filter rules 162.4 1,972.2 168.1 688.5 174.3 89.2
Routing none (fast path) 162.4 1,972.2 444.4 1,820.3 1035.0 529.9
Routing 25 simple queues 162.4 1,972.2 179.6 735.6 171.4 87.8
Routing 25 ip filter rules 92.9 1,128.2 94.1 385.4 93.8 48.0
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

More info

hAP ac

The hAP ac is our most universal home or office wireless device. It is a dual band device with Gigabit ports that allow the full advantages of 802.11ac technology speed, while maintaining compatibility with legacy devices in 2GHz 802.11 b/g/n and 5GHz a/n modes.

The omnidirectional antennas allow to mount the hAP ac in any location, and the high power transmitter will ensure good coverage for the mobile devices in your home, office or public location.

Other helpful features include a USB port for attaching extra storage or a 3G/4G modem, PoE output on the last Ethernet port, to power other RouterBOARD devices without needing an extra power adapter and a SFP cage, for connecting active or passive optical network modules.

We have two versions available.

– RB962UiGS-5HacT2HnT-US (USA) is factory locked for 2412-2462MHz, 5170-5250MHz and 5725-5835MHz frequencies. This lock can not be removed.

– RB962UiGS-5HacT2HnT (International) supports 2412-2484MHz and 5150MHz-5875MHz range.

Product specifications

Details
Product code RB962UiGS-5HacT2HnT
CPU nominal frequency 720 MHz
CPU core count 1
Size of RAM 128 MB
10/100/1000 Ethernet ports 5
Wireless chip model QCA9880
Wireless standards 802.11a/n/ac
Secondary wireless chip model QCA9558
Secondary wireless standards 802.11b/g/n
Number of USB ports 1
Power Jack 1
PoE out Yes
Supported input voltage 11 V – 57 V
PoE in Yes
Voltage Monitor Yes
PCB temperature monitor Yes
Dimensions 114 x 137 x 29mm
Operating System RouterOS
Tested ambient temperature -20C .. +60C
License level 4
Antenna gain DBI 2
CPU QCA9558
Max Power consumption 17W
SFP ports 1
USB slot type USB type A
Number of chains 3
Storage type FLASH
Storage size 16 MB
Suggested price $129

Wireless specifications

5 GHz
Transmit power (dBm) Receive Sensitivity Transmit power (mW)
6MBit/s 28 -96 631
54MBit/s 25 -81 316
MCS0 28 -96 631
MCS7 24 -77 251
MCS9 21 -72 126

wireless parameters may be limited in software, depending on your local regulatory limitations

Ethernet test results

RB962UiGS-5HacT2HnT QCA9558 1G all port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 161.9 1,966.1 345.5 1,415.2 435.6 223.0
Bridging 25 bridge filter rules 125.5 1,524.1 126.5 518.1 128.8 65.9
Routing none (fast path) 161.9 1,966.1 334.2 1,368.9 397.9 203.7
Routing 25 simple queues 161.9 1,966.1 183.9 753.3 203.3 104.1
Routing 25 ip filter rules 78.1 948.4 77.8 318.7 77.5 39.7
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

More info

CCR1072-1G-8S+

Our new flagship router, the CCR1072, is powered by a Tilera 72 core CPU, each core is clocked at 1GHz, and to fully utilise this power, the CCR1072 is equipped with eight independently connected 10G SFP+ ports.

The unit comes equipped with installed RouterOS L6, 16GB of built in ECC RAM, touchscreen color LCD, two removable (hotplug) power supplies for redundancy, smart card slot, microUSB, regular size USB, microSD and 2x M.2 slots for additional storage.

Thanks to the unique 72 core processor and ports that are directly connected to the CPU, CCR1072 is capable of over 120 million packets per second throughput.